Bioconversion of Oil Palm Waste into Protein-Based Bioplastic Using BSF (Hermetia illucens) Larvae

Authors

  • Muhammad Gunawan University of Mulawarman
  • Intan Rohyana Devi Bachelor of Biology, Faculty of Mathematics and Natural Science, Mulawarman University, Samarinda 75119, Indonesia
  • Maharana Bachelor of Biology, Faculty of Mathematics and Natural Science, Mulawarman University, Samarinda 75119, Indonesia
  • Maharani Bachelor of Biology, Faculty of Mathematics and Natural Science, Mulawarman University, Samarinda 75119, Indonesia
  • Rudy Agung Nugroho Department of Biology, Faculty of Mathematics and Natural Sciences, Mulawarman University, Samarinda 75119, Indonesia https://orcid.org/0000-0001-9006-7329 (unauthenticated)

DOI:

https://doi.org/10.56060/bdv.2026.5.1.2767

Keywords:

Protein-based bioplastics, oil-palm waste, bioconversion, Hermetia illucens, saccharification

Abstract

This study addressed the environmental challenge of palm oil waste by utilizing Oil Palm Empty Fruit Bunch (OPEFB) and Oil Palm Kernel Cake (OPKC) as substrates for Hermetia illucens (Black Soldier Fly) larvae bioconversion. The larvae were cultivated after OPEFB pre-treatment through milling, hydrolysis, and saccharification with Aspergillus niger to enhance digestibility. Protein extracted from larvae was used to produce protein-based bioplastics. Result showed consistent larval growth and consumption rates but variation in waste reduction efficiency, with the 7:3 substrate ratio yielding the highest reduction. Bioplastics exhibited good elasticity and biodegradability, while protein enrichment improved mechanical strength and reduced water absorption. This approach demonstrates a sustainable alternative for managing palm oil waste and producing eco-friendly bioplastics.

References

de Figueiredo, F. L., Contesini, F. J., Terrasan, C. R. F., Gerhardt, J. A., Corrêa, A. B., Antoniel, E. P., Wassano, N. S., Levassor, L., Rabelo, S. C., Franco, T. T., Mortensen, U. H., & Damasio, A. (2024). Engineering the secretome of Aspergillus niger for cellooligosaccharides production from plant biomass. Microbial Cell Factories, 23(1), 323-. https://doi.org/10.1186/S12934-024-02578-9/FIGURES/5

Diyanilla, R., Hamidon, T. S., Suryanegara, L., & Hazwan Hussin, M. (2020). Overview of Pretreatment Methods Employed on Oil Palm Biomass in Producing Value-added Products: A Review. BioResources, 15(4), 9935–9997. https://doi.org/10.15376/biores.15.4.9935-9997

Gürbüz, Z., Şengül, M., Erkaya-Kotan, T., & Sarıcaoğlu, F. T. (2024). A novel composite edible film based on quince seed gel and whey protein concentrate as affected by transglutaminase crosslinking. International Journal of Food Science and Technology, 59(9), 6163–6173. https://doi.org/10.1111/IJFS.17350

Indonesia, B. (2024). Volume 17, 2024. 17.

Jeyasubramanian, K., & Balachander, R. (2016). Starch bioplastic film as an alternative food-packaging material. Journal of Achievements of Materials and Manufacturing Engineering, 75(2), 78–84. https://doi.org/10.5604/17348412.1228383

Josua Dani Silalahi, Aryati, I., Sakiah Sakiah, & Eka Bobby Febrianto. (2022). Perkembangan Maggot Black Soldier Fly Dalam Biopond Berbahan Tandan Kosong Kelapa Sawit Dan Limbah Dapur. Jurnal Agro Estate, 6(1), 18–26. https://doi.org/10.47199/jae.v6i1.97

Lamp, A., Kaltschmitt, M., & Dethloff, J. (2022). Options to Improve the Mechanical Properties of Protein-Based Materials. Molecules, 27(2), 446. https://doi.org/10.3390/MOLECULES27020446

Lopez, E. C. R. (2023). Pyrolysis of Polyvinyl Chloride, Polypropylene, and Polystyrene: Current Research and Future Outlook. Engineering Proceedings 2023, Vol. 56, Page 44, 56(1), 44. https://doi.org/10.3390/ASEC2023-15376

Purewal, S. S., Kaur, A., Bangar, S. P., Singh, P., & Singh, H. (2023). Protein-Based Films and Coatings: An Innovative Approach. Coatings 2024, Vol. 14, Page 32, 14(1), 32. https://doi.org/10.3390/COATINGS14010032

Safitri Nurkomariyah, & Rachmanto, T. A. (2023). Pemanfaatan Lindi Menjadi Kompos Melalui Budidaya Larva Black Soldier Fly (BSF). INSOLOGI: Jurnal Sains Dan Teknologi, 2(4), 736–744. https://doi.org/10.55123/insologi.v2i4.2305

Saputri, L. H., & Sukmawan, R. (2020). Pengaruh Proses Blending dan Ultrasonikasi terhadap Struktur Morfologi Ekstrak Serat Limbah Batang Kelapa Sawit untuk Bahan Baku Bioplastik (Selulosa Asetat). Rekayasa, 13(1), 15–21. https://doi.org/10.21107/rekayasa.v13i1.6180

Shah, Y. A., Bhatia, S., Al-Harrasi, A., Afzaal, M., Saeed, F., Anwer, M. K., Khan, M. R., Jawad, M., Akram, N., & Faisal, Z. (2023). Mechanical Properties of Protein-Based Food Packaging Materials. Polymers 2023, Vol. 15, Page 1724, 15(7), 1724. https://doi.org/10.3390/POLYM15071724

Teh, C. B. S. (2016). Availability, use, and removal of oil palm biomass in Indonesia. Report Prepared for the International Council on Clean Transportation, 1–39.

Wicaksono, L. H., Petrus, H. T. B., & Yuliansah, A. T. (2017). Reduksi limbah palm kernel meal dan kompos tandan kosong kelapa sawit menggunakan larva Hermetia Illucens. Simposium Nasional RAPI XVI, 91–96.

Downloads

Published

2026-03-31

How to Cite

Bioconversion of Oil Palm Waste into Protein-Based Bioplastic Using BSF (Hermetia illucens) Larvae. (2026). BIODIVERS - BIOTROP Science Magazine, 5(1), 12-19. https://doi.org/10.56060/bdv.2026.5.1.2767